Publicidad
Idiomas disponibles
Idiomas disponibles
To Replace
Regulator
1.
Release all air pressure from air
tank. See "To Drain Tank" in the
Maintenance section.
2.
Set the On/Auto/Off
lever to
"OFF" and unplug unit.
3.
Remove the outlet pressure
gauge and adapter from the
regulator.
Regulator
4.
Remove the regulator.
5.
Apply pipe sealant tape to the
nipple.
6.
Assemble the regulator and
orient as shown.
NOTE: Arrow indicates flow of air.
Make sure it is pointing in the
direction of air flow.
Regulator
7.
8.
Reapply pipe sealant to outlet
pressure gauge and adapter.
Reassemble outlet pressure
gauge and adapter. Orient outlet
pressure gauge to read correctly.
Tighten quick connect with
wrench.
19_ ENG
A00844
Publicidad
