Publicidad
Idiomas disponibles
Idiomas disponibles
2)The power supply voltage requires rated voltage and must be reliably
grounded; it cannot share the same socket with other electrical appliances.
3)There should be enough space of more than 200mm on the side of the
inlet and outlet air grille to ensure heat dissipation of the machine.
4)Dust the machine condenser regularly, and the interval should not
exceed 3 months
5)When the machine is working, do not touch the pot surface directly with
your hands to prevent frostbite.
6)Do not use the machine directly in a place exposed to direct sunlight, as
it will directly affect the cooling effect.
7)After use, unplug the power supply and clean the machine. The surface
can be wiped with a wet towel; it is strictly forbidden to rinse it directly with
water.
Fault
The
machine
alarms and
does
not
work
reasons
1. If the power supply
voltage is too high or too
low, it will display YH or
YL and alarm.
2.
The
refrigeration
sensor is faulty, displays
FP,
and
alarms;
machine
does
maintain
a
temperature and does
not stop.
3.
The
fresh-keeping
sensor
is
faulty
displays FB.
And alarm; the machine
does
not
maintain
constant
temperature
and does not stop.
4. The switch or control 4. Check the line and
Methods of exclusion
1. Unplug the power plug
and adjust the voltage.
Restart
the
not
2. Replace the sensor
constant
and
3. Replace the sensor
a
- 5 -
Publicidad
