Joy-IT JT-PS360-C Manual Del Usuario página 7

1. GENERAL INFORMATION
Dear customer, thank you for choosing our product. In the following, we have listed
what to consider during commissioning. If you encounter any unexpected problems
during use, please feel free to contact us.
The JT-PS360-C is a laboratory power supply which can be used in different operating
modes (e.g. constant current or constant voltage mode). The keypad, as well as the
pressure and rotary encoders, make the operation of the power supply particularly
convenient. In addition, up to nine settings can be stored and loaded using the keypad.
The high-resolution 1.54" color display clearly presents all important information. The
USB interface allows the device to be operated from the PC.
ATTENTION! Do not connect any inductive loads to the device. If you nevertheless
wish to connect inductive loads, you must protect the laboratory power supply unit
against reverse currents. Otherwise, damage to the device cannot be ruled out.
2. TECHNICAL SPECIFICATIONS
Input voltage
Output voltage
Output current
Output power
Voltage resolution
Current resolution
Voltage accuracy
Current accuracy
Ripple
Response time in constant voltage mode
Load regulation in constant voltage mode
Load regulation in constant current mode
Measuring range electric charge
Measuring range energy
Display
Over temperature protection
6
200 - 240 V AC / 100 - 120 V AC
0 - 60 V
0 - 6 A
0 - 360 W
0,01 V
0,001 A
± (0,3% + 3 digits)
± (0,5% + 5 digits)
100 mV VPP
2 ms @ 0,1 A - 5 A
± (0,1% + 2 digits)
± (0,1% + 3 digits)
0 - 9999,99 Ah
0 - 9999,99 Wh
1,54" (3,91 cm) LCD display
above 90 °C
3. DEVICE OVERVIEW
A
24°C
H
60.00 VI N : 65. O O V
V&A SET
V
60.00
V
6.000
6.100
B A
A
OXP S ET
360.0 62.00
V
W
6.200
I A
M 0 CV
000 mAh
C E F
K
L J M
4. DISPLAY
G P O N
24°C
M
60.00 VIN: 65.OOV
V&A SET
A
V
L
60.00
V
6.000
K
B 6.100
A
A
OXP SET
360.0 62.00 J
V
C
W
6.200 I
A
0 CV
M
000mAh
D E F H
A: Voltage setting
B: Confirmation button
C: Current setting
D: Rotary encoder
D
E: Display
F: Micro-USB interface
G: Turn output on/off
H: Output power supply:
positive contact
G
I: Output: negative contact
J: Connection power plug
K: On/Off switch
L: Case fan
M: Input voltage
setting (230V / 110V)
A: Current output voltage
B: Current output current
C: Current output power
D: Current data group
E: Operating mode (constant voltage/current)
F: Protection status display
G: System temperature
H: Electrical charge battery
I: Overcurrent protection limit
J: Overvoltage protection limit
K: Preset output current
L: Preset output voltage
M: DC Input voltage
N: Communication interface
O: Key lock
P: Key tones
7