Descargar Imprimir esta página

Hilti KCF 4-22 Manual De Instrucciones Original página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Direct current (DC)
Li-ion battery
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Never strike the battery with an object and never use the battery as a striking tool.
Hilti Li-ion battery type series used. Observe the information given in the section headed Intend-
ed use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Jobsite fan
Generation
Serial no.
1.5
Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
2
Safety
2.1
General safety instructions
Read all safety instructions and other instructions.
▶ Keep fingers away from the front and rear fan covers.
▶ This product can be used by children 8 years of age or older and by persons with physical, sensory
or mental disabilities or little relevant experience or know-how if they are supervised or have received
instruction on the safe use of the product and the resulting hazards.
▶ Do not use a product that is damaged, bent or cracked.
▶ Do not switch on the product unless both the front and the rear fan covers are installed.
▶ Do not disassemble the product yourself, even when performing maintenance.
▶ Remove the battery pack before carrying out maintenance tasks or storing the product.
▶ Risk of trapping hand when adjusting the fan angle; gently push or pull the carrying handle.
▶ Keep your hair, clothing and jewelery away from openings and moving parts.
▶ Do not insert objects into openings.
▶ Risk of injury by moving parts. Do not touch the fan rotor while it is in motion. Make sure that the product
is switched off and wait until the fan rotor stops before picking up or carrying the product.
▶ Switch the product off before removing the battery.
▶ Risk of injury by falling products. Before starting work, check that the battery is secure.
14
English
KCF 4-22
01
2419422
*2419422*

Publicidad

loading

Productos relacionados para Hilti KCF 4-22