damage SIM card and the phone.
Inserting and Taking out SIM Card
Metal contact surface of SIM card is easily scratched. You must take out SIM care carefully before
the assembly.
" Power off the phone, remove the rear cover, battery or other external power supply.
" Make the end of SIM card without cutting angle inside and aim at the card slot of the phone and
metal surface of SIM card face downward, then insert SIM card to the card slot of the phone.
" When taking out SIM card, directly pull it outward and then can take out SIM card.
Prompt: Without special explanation inserting two SIM cards are defaulted in the manual. If you
just insert one SIM card, maybe some options of the menu will not be shown.
MEMORY CARD
Take out the rear cover and battery, according to the prompt shown on the card slot of memory
card, press the card slot of memory card using the finger, and then move at the direction of OPEN, open
the card slot cover of memory card, make one end with metal card and metal surface face downward,
place the memory card in the card slot, close the card slot of memory card, press the card slot of T card
using the finger, and then moves at the direction of LOCK.
Prompt: If the memory card is failed, please check whether it is correctly placed and good
contact of metal point.
BATTERY
INSTALL THE BATTERY
" Take off the back cover of the mobile.
" Make one end of battery with metal surface aim at the battery connector.
" Then gently press the battery downward using the finger, and then press the other end to install the
battery.
Prompt: Please operate correctly to avoid damaging the battery connector.
CHARGING
Insert the charger on the charging interface at the side end of the phone.
After inserting the charging plug, battery strength icon stripe at the top right corner of the screen is
scrolling, which means that the charging is processing; when the stripe is full of the whole icon and stop
scrolling, which means that the battery charging is completed; when the charging is completed, please
pull out the plug.
When electric quantity is not enough, warning message will be sent; and electric quantity shows
empty. When electric quantity is too low, the phone will power off automatically. Please don't make the
battery in the status of not enough electric quantity for a long time; otherwise it may damage the battery
quality and service life. Please don't charge the battery for a long time.
Prompt: In order to ensure normal operation of the phone, please make sure to use the
designated charger.
Página 10