Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Align the holes with screws then put the blade guard on
the blade.
3. Tighten the nut.
Only use with handle and guard properly assembled to
hedge trimmer. The use of the hedge trimmer without the
proper guard or handle provided may result in serious
personal injury.
9.1.2
ATTACH THE AUXILIARY HANDLE
1. Attach the auxiliary handle and lower clamp on the shaft.
2. Set the auxiliary handle in the most comfortable in use
position.
3. Put the bolt through the holes.
4. Tighten the auxiliary handle with the knob.
9.1.3
INSTALL THE BATTERY PACK
WARNING
English
•
If the battery pack or charger is damaged, replace the
battery pack or the charger.
•
Stop the machine and wait until the motor stops before
you install or remove the battery pack.
•
Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
9.1.4
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
10
OPERATION
•
Touch the blade carefully.
•
Do not put your fingers into the notches or in position
where they can get cut.
•
Do not touch the blade unless you remove the battery
pack.
•
Do not use the machine if the blade is damaged or bent.
•
Remove all objects such as cords, lights, wire, or string
which can become entangled in the cutting blade and
create a risk of personal injury.
If the blade jams on an electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BE LIVE AND
DANGEROUS. Do the steps below:
1. Hold the insulated rear handle or put the machine down
and away from you.
2. Disconnect the electrically service to the damaged line
or cord before you try to free the blade.
8
WARNING
WARNING
Publicidad
