Publicidad
Idiomas disponibles
Idiomas disponibles
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control lock Mode (Command: k m)
To lock the remote control and the front panel controls
on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you're not using the remote control and front panel
controls on the Monitor set, use this mode. When main
power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not turn on
by POWER button of remote control and on the TV.
14. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to "Real data mapping".
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
15. 3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data1
00: 3D On
02: 3D to 2D
Data2
00: Top and Bottom
02: Check Board
04: Column interleaving 05: Row interleaving
Data3
00: Right to Left
Data4
3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
*If data1 is 01(3D Off) , data2 , data3 , data4 have no
meaning.
* If data1 is 02(3D to 2D), data2, data3 and data4 have no
meaning.
* If data1 is 03(2D to 3D), data2 and data3 have no
meaning.
Data 01
Data 02
Data 03
00
o
o
01
x
x
02
x
x
03
x
x
x : Don't care
Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
01: 3D Off
03: 2D to 3D
01: Side by Side
03: Single Frame Sequential
01: Left to Right
Data 04
x
x
x
o
EXTERNAL CONTROL DEVICE SETUP
16. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to "Real data mapping".
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
17. Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV. Use the feature depending
on your model.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]
Data1: 3D option
00: 3D Picture Correction
01: 3D Depth
02: 3D Viewpoint
07: 3D Sound Zooming
08: Normal Image View
09: 3D Mode
Data2: It has own range for each 3D option determined
by Data1.
1) When Data1 is 00
00: Right to Left
2) When Data1 is 01
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code)
3) When Data1 is 02
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code)
4) When Data1 is 07
00: Off
5) When Data1 is 08
00: Off
6) When Data1 is 09
00: Standard
02: Cinema
04: Manual
Acknowledgement [v][ ][OK][Data01][Data02][x]
[v][ ][NG][Data01][x]
* Use the feature depending on your model.
18. ISM Method (Command: j p)
To avoid having a fixed image remain on screen.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 02: Orbiter
08: Normal
20: Color Wash
Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving (Command: j q)
To control the energy saving function.
Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: off
9
01: Left to Right
01: On
01: On
01: Sports
03: Extreme
Publicidad
