Hama 00181017 Instrucciones De Uso página 2

G Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
2. Safety Instructions
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating and use it in
dry rooms only.
• Do not use the product in the immediate vicinity of heaters or other
heat sources or in direct sunlight.
• Do not drop the product and do not expose it to any major shocks.
• Do not attempt to service or repair the product yourself. Leave any
and all service work to quali ed experts.
• Do not open the device or continue to operate it if it becomes
damaged.
• Dispose of packaging material immediately according to locally
applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of
children!
3. System Requirements
The Card Reader supports the following operating systems:
• Windows 11 / 10 / 8 / 7
• Mac OS 10.x or higher
4. Product Features
Note
• You will nd a list of the supported card formats on the packaging
or at www.hama.com (enter the item number in the search).
• Please refer to the packaging or our homepage www.hama.
com (enter the item number in the search) to know whether
the card reader supports UHS-I, UHS-II (SD / microSD) or UDMA
(CompactFlash).
• The maximum data transfer rate is achieved when both the card
and the card reader support UHS-I, UHS-II or UDMA.
• Please refer to the packaging or our homepage www.hama.com
(enter the item number in the search) to know whether the card
reader supports data exchange directly from memory card to
memory card.
2
5. Getting started
Note – Compatibility
• USB 3.1/3.0 card readers are downward compatible with USB 2.0.
• No additional drivers are needed. The installation runs
automatically.
• Plug your memory card into the appropriate slot of the Card Reader.
• Connect the Card Reader to an available USB port on your terminal
device.
• You can now run the data transfer between your terminal device and
the memory card.
Warning – Data Loss
• Ensure that the data transfer is done before you remove a memory
card from your Card Reader.
• Always use the eject function of your operating system before
you remove a memory card from your Card Reader or disconnect
your Card Reader (with inserted memory card) from your terminal
device.
• Data loss can´t be excluded at disregard!
• Under no circumstance does Hama GmbH & Co KG accept liability
for loss of data stored on data storage media.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not
use aggressive cleaning agents. Make sure that water does not get into
the product.
7. Exclusion of Warranty
Hama GmbH & Co KG assumes no liability and provides no warranty for
damage resulting from improper installation/mounting, improper use of
the product or from failure to observe the operating instructions and/
or safety notes.