Publicidad
Idiomas disponibles
Idiomas disponibles
<YHUSKY
GENERAL SAFETY RULES
UNPAKING
FEATURES
OPERATION
USING BELT HOOK
ADJUSTING THE EXHAUST
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NO-MARRING PAD
SETTING THE AIR PRESSURE
DEPTH ADJUSTMENT
FIRING THE TOOL
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLE SOLVING
WARRANTIES
A
WARNING:
P3
P6
P6
P7
P7
P7
P7
P8
P8
P8
P8
P9
P9
P10
P11
P12
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common
sense and caution
are factors which cannot be built into this product, but must be supplied by the user.
SAVE THIS MANUAL
@ Keep
this manual
for the safety wamings,
precautions,
operations,
inspections
and
maintenance.
Keep
this
manual
and
the
receipt
in a safe
and
dry place for future
reference.
SYMBOLS
A WARNING:
To
avoid
serious
personal
injury,
do
not
attempt to use this product until you read the
manual
thoroughly
and
understand
it
completely.
Save
this
manual
and
review
frequently for continuing safe operation and
instructing others who may use this tool.
@ Some of the following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
before using this product.
operating this product.
02
ee Read operator's manual : To reduce the risk of injury, user must read and understand operator's manual
(O Risk to hearing: Always wear ear protection when using this tool. Failure to do so may result in hearing loss.
S
Eye protection: Always wear safety goggles, safety glasses with side shields, or a full face shield when
A Risk of serious personal injury: Never place hands or any other body parts in the fastener discharge area
of the nailer. The tool might eject a fastener and could result in death or serious personal injury.
<YHUSKY
@ In this manual, on the labels, packages and all other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS
SIGNAL
MEANING
A
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
A
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION:
GENERAL SAFETY RULES
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS
A WARNING:
When
using
tools,
basic
precautions
should always be followed, including the
following:
CALIFORNIA PROPOSITION 65
A WARNING:
This
product
or
its power
cord
may
contain
chemicals
known
to the State
of California to cause
cancer
and birth
defects
or
other
reproductive
harm.
Wash hands after handling.
WORK AREA
@ Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
O Do
not
operate
the
tool
in
explosive
atmospheres,
such
as in the presence
of
flammable
liquids, gases, or dust. The tool
creates a spark which
may ignite flammable
liquids, gases or dust.
O Keep bystanders, children, and others away
while operating the tool. Distractions could
result in improper use and cause injury.
@ Avoid
unintentional
misfires.
Always
use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
(Without symbol) Indicates a situation that may result in
property damage.
PERSONAL SAFETY
@ Do not nail on top of another nail. This is
able to cause the nail to be deflected and hit
someone, or cause the tool to react and result in
a risk of injury to persons.
@ Remove finger from the trigger when
not
driving fasteners.
Never carry the tool with
finger on trigger, the tool is able to fire a
fastener.
@ Always wear eye protection. Operator and
others in the work area should always wear
ANSI-approved
safety
goggles
with
side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe
eye injury. You can use the goggles
packed with the tool.
@ Always
wear
hearing
protection
when
using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
O Use safety equipment. A dust mask, non-skid
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
if you are producing metal filings or wood chips.
O Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose
clothes, jewelry, or long hair can
be
caught in moving parts.
@ Stay alert, watch what you are doing and
use
common
sense
when
operating
a
power tool. Do not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
@ Avoid unintentional firing. Keep fingers away
from
trigger
when
not
driving
fasteners,
especially when connecting the tool to the air
supply.
@ Keep proper footing and balance at all times.
Proper
footing
and
balance
enables
better
control of the tool in unexpected situations.
Publicidad
