Redarc SMRP1060 Manual De Instalación página 6

SERIES AND PARALLEL CONNECTIONS
SERIES CONNECTIONS
Connecting two identical Panels (of the same wattage) in series will multiply
the system voltage by 2 and keep the output current at the same level. Series
connections can be made by connecting the positive connector of one Panel
to the negative of the next
2 × 22.5 V / 4.5 A / 80 W Panels
1 × 45 V / 4.5 A / 160 W array
WIRING PANELS IN PARALLEL WITH A BCDC
Battery Charger***
BLACK
Fuse*
Auxiliary
Battery
*Not supplied. For other installations, appropriate sized fuses and cables must be used and be determined according to your installation requirements.
**Butt splice crimp connections are recommended for fixed Solar Panel installation.
***REDARC BCDC Battery Chargers have a built in regulator, DO NOT install a regulator between the Solar Panel and BCDC Battery Charger.
6 | EN English
=
REDARC
YELLOW
RED
PARALLEL CONNECTIONS
Connecting two identical Panels (of the same wattage) in parallel will multiply
the total output current by 2 and keep the system voltage at the same level.
Parallel connections can be made using the REDARC MC4 Connector
Y-Adaptor cable (SRC0006).
Butt Splice
Crimp Connection**
MC4 Connector to Bare-Wire*
2 × 22.5 V / 4.5 A / 80 W Panels
=
1 × 22.5 V / 9.0 A / 160 W array
MC4 Connector
Y-Adaptor Cable*
5 m (16.4') SRC0001
10 m (32.8') SRC0002
1.5 m (4.9') SRC0003
SRC0006