Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly — Hanging the Fan
4
Attaching the mounting bracket to the
electrical box
WARNING: To reduce the risk of re, electric shock or other
personal injury, mount the fan only to an outlet box or supporting
system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
Pass the 120 volt supply wires through the center hole in
the mounting bracket (A).
Install the mounting bracket (A) to the outlet box with the
screws and washers provided with your outlet box.
Securely tighten the two mounting screws.
5
Hanging the fan on the mounting
bracket
Remove two screws (OO) from two upper sides of hanger
ball (KK).
Carefully lift the fan motor assembly (F) up to the mounting
bracket (A) and seat the hanger ball/downrod assembly (D)
in the mounting bracket (A) socket.
Securely tighten two screws (OO).
Secure the safety cable (PP) to the building structure that
independent to the outlet box using safety cable screw, lock
washer and at washer (CC) (included). The safety cable
should be in a stress-free state after installation.
Outlet Box
OO
A
A
8
D
CC
PP
OO
KK
F
Publicidad
