INVENTOR E2-ION16L Manual Del Propietário página 11

When the unit is on:
• Press the Timer button to activate the Auto stop function.
• Within the same program sequence, TIMER ON OFF indicator lights illuminate
identifying that both ON and OFF times are now programmed.
• Turning the unit ON or OFF at any time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop function. When the control panel
window displays code "P2", the Auto Start/Stop function will be terminated.
TURBO
Press the "TURBO" button in order to adjust the fan speed for maximum moisture removal.
• When the set humidity has been reached and if quiet operation is preferable,
press once again the Turbo button to return to the Standard operation.
• When immediate dehumidification is necessary such as in areas or rooms
not in use for an extended period of time, etc.
ION
Press the "ION" pad to switch on or off the ionizer. By activating the ionizer, positive and
negative ions are released to purify the air and remove unpleasant and unhealthy particles.
By pressing once again this function will be terminated.
INDICATIONS
Bucket Full Indicator
Indicator "Full" turns red following a beep alert when bucket is full, removed, or misplaced.
• The water level control switch shuts off the dehumidifier when the bucket
is full, removed or misplaced.
Auto Defrost
When frost builds up on the evaporator coils, the compressor will cycle off and the fan will
continue to run until the frost disappears. In this case the display of the unit will show the
P1 code.
• This function not only ensures the safe and appropriate operation of the
dehumidifier but is also more efficient and economical in its performance.
NOTE:
• When Auto Defrost is operating, the unit may cause some
• Do not turn the dehumidifier off when auto defrost is
EN
noise of the refrigerant fluids flowing, this is normal.
operating.
11