BellaVista 106165 Instrucciones De Montaje página 32

Manufacturer and Product Service
Replacement parts are available through our
product service� Retain your purchase receipt�
The product images on the packaging and in the
guide are representative�
Assembly
• Use a blanket or tarpaulin underneath to
prevent scratches on both the floor and
the item�
• Assemble the product with at least two
people� Take your time during assembly�
• Ensure you have enough space (at least
10 m
2 ) in a quiet area for assembly�
• Lay out all the components in front of
you�
• Before assembly, check if all parts are
present in the stated quantity� If any parts
are missing or damaged, contact the
manufacturer immediately�
• If you can't locate certain small parts,
they might be pre-assembled�
• Do not attempt to open sealed or welded
components�
• Once assembly has started or is comple-
ted, claims due to damages or missing
Disassembly
Disassemble in reverse order of assembly�
32
We hope you enjoy your
bellavista - Home & Garden® product.
GB
Item No.: 106165
Alltrade TOPO GmbH
Eiffestraße 76
D-20537 Hamburg
info@alltrade-topo�de
alltrade-topo�de
parts cannot be accepted�
• If drill holes do not fit exactly, first do not
tighten the screws or loosen them again�
This gives jammed screws more room to
move� Then tighten all the screws one
after the other�
• Make sure that all screws are tight! The
screw connections can loosen during
use and thus affect the stability of the
product� Therefore, retighten the screws
regularly�
• After assembly, make sure all parts are
correctly in place and functional�
• If there are remains of Styrofoam on the
suction cups on the table top, you can
easily clean them with a damp cloth�
106165 10 / 2023