Publicidad
Idiomas disponibles
Idiomas disponibles
• Before performing setting or maintenance work, re-
lease the start button and pull out the power plug.
Warning! This power tool generates an electromagnet-
ic field during operation. This field can impair active or
passive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
7.
Technical data
AC motor
Power
Length of mains connection
cable
Length of high-pressure hose
Weight
Protection class
Protection category
Design pressure / working
pressure (p)
Max. permissible pressure
(p max)
Max. supply pressure (p max)
Max. supply temperature (T
in max)
Rated flow rate (Q)
Max. flow rate (Qmax)
Subject to technical changes!
Noise and vibration
m WARNING! Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection for you and persons
in the vicinity.
The noise and vibration values have been determined
in accordance with EN 60335-2-79.
Noise data
Sound pressure level L
pA
Uncertainty K
pA
24 | GB
Sound power level L
Guaranteed sound power level
L
Uncertainty K
Vibration parameters
Vibration a
Uncertainty K
The specified total vibration value and the specified
noise emission value have been measured in accord-
ance with a standardised test procedure and can be
230 V~
used to compare one power tool with another.
1600 W
The total noise emission values specified and the total
vibration emission values specified can also be used
5 m
for an initial estimation of the load.
5 m
m WARNING! The noise emission values and vi-
7.2 kg
bration emission value can vary from the specified
II
values during the actual use of the power tool, de-
pending on the type and the manner in which the
IPX5
electric tool is used, and in particular the type of
workpiece being processed.
9 MPa / 90 bar
13.5 Mpa / 135
Try to keep the stress as low as possible. Exemplary
bar
measures: the limitation of working hours. In doing so,
all parts of the operating cycle
1.2 Mpa / 12 bar
must be taken into account (such as times in which
50°C
the electric tool is switched off or times in which it is
switched on, but is not running under a load).
6 l/min
8. Unpacking
7 l/min
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
• With accessories as well as wearing parts and re-
74.6 dB
3 dB
www.scheppach.com
WA
WA
WA
h
aging and transport safety devices (if present).
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating manual before using for the first time.
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
88.3 dB
92 dB
3 dB
2.089 m/s
2
1.5 m/s²
Publicidad
