Descargar Imprimir esta página

KIKKA BOO i-DRIVE Instrucciones De Uso página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
IMPORTANT! KEEP FOR FUTURE REFERENCE!
EN
READ CAREFULLY!
I. PARTS
1. Headrest adjustment; 2. Head pillow; 3. Shoulder straps; 4. Baby cushion; 5. Buckle pad; 6. Five-point seat belt adjustment button; 7. Adjustment strap; 8. Rotation button; 9. Handle
for adjusting the angle; 10. Buckle; 11. Shoulder pad; 12. Headrest belt guider; 13. Seat belt guider; 14. Top tether adjustment; 15. ISOFIX attachment; 6. Gr. II and Gr.III beltguider.
II. THE ADJUSTMENT AND INSTALLATION OF A CHILD SAFETY SEAT
THE USAGE OF THE BUCKLE
2.1 Put the left and right clamps of the buckle together (as shown in the picture), ensure the left and right tongues are meeting together.
2.2 The left and right clamps should be closed and no gap should be left and keep face up.
2.3 Insert the buckle tongue into the slot.
2.4 If you hear "click' it means that the buckle has been fastened.
THE USING OF THE BUCKLE
2.5-2.7 When the buckle passes the appropriate position through the groove, the buckle is inserted into the cloth groove, pull the belt several times to make sure that the buckle is stable
and finally put the buckle pad on.
NOTICE!
The buckle shall be kept dry.
ADJUST THE LENGTH OF THE BELT
2.8 Tighten your seat belt: pull up the adjustment strap to keep the belt fastened as tight as possible. Loosened belt is extremely dangerous, so please make sure that the belt is fastened
before using.
2.9 Loosen your seat belt: you can loose your seat belt by pressing the adjustment button in front of the seat. Press down the adjustment button while pulling the two straps under the
shoulder pads to loosen the seat belt.
ADJUST THE HEIGHT OF HEADREST
2.10 Release the seat belt by adjusting the adjustment button in front of the seat and pull the headrest up, move the headrest to the suitable height.
2.11 Properly adjust the headrest to ensure that your child is in the safety seat to provide the best protection; The headrest must be adjusted to the height which is similar with child's
shoulder.
NOTICE!
The shoulder straps must be at the height which is similar with child's shoulder or slightly above the shoulders of children. The shoulder strap should not be placed behind
the child or near the ear.
ADJUST THE RECLINING OF THE SEAT
The safety seat can be adjusted to many different angles.
2.12-2.14 Rearward facing: The maximum angle help your child to sleep soundly. If your child's age is less than 15 months, it must be rearward facing.
WARNING!
Do not use forward facing before the child's age exceeds 15 months. For stature 40-105cm, please use 1,2,3,4 position.
2.15 Forward facing:Press the base of the car seat by one hand, and pull the adjustable button under the shell to adjust to the suitable position(there are four positions). For stature
76-105cm, please use 1,2,3,4 position. When using position 4 it may not fit in all vehicles. For stature 100- l50cm, please use only 1st position.
CUSHION FOR A NEWBORN BABY
NOTICE!
When the height of baby is 40-87cm, pIease use the newborn baby's cusion.
2.16-2.17 Put the newborn baby cushion under the shoulder pad, and put on the buckle cover.
THE ROTATION FUNCTIONS
Seat from rearward facing to forward facing.
2.18 Press the rotation button and rotate it by hand. Turn the seat to forward facing by rotation 180° degrees.
2.19-2.21 After rotating the child safety seat in the correct direction, please make sure the child safety seat rotation has been locked.
Seat from forward facing to rearward facing:
2.22-2.23 Adjust the seat to the maximum reclining position by pulling the reclining handle.
2.24-2.25 Press the rotation button and rotate it by hand. Turn the seat to rearward facing by rotation 180° degrees.
NOTICE!
Before each trip, please make sure that the seat rotation is locked by turning the seat in both directions. If your child's age is less than 15 months, please use rearward facing.
Before each trip, please make sure the child seat is in the correct group and configuration.
5-POINT SAFETY BELT TO FASTEN THE CHILD
2.26 Put together the left and right clip and insert the buckle, it is indicated that the buckle is fastened when you hear "ka" sound. Press the adjustment button and pull the strap, in the
same time, please keep the child's shoulders comfortable.
THE WAY TO REMOVE 5-POINT SAFETY BELT
2.27-2.28 Rotate the safety seat to the back and open the back cover.
2.29 Pull the strap out, which is together with the three-way connection, as long as possible and place this position as shown in the picture.
ENGLISH

Publicidad

loading