Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove the water tank.
2. Connect a suitable water hose
to the drain pipe with a clamp.
3. Replace the water tank and guide the hose
through the opening.
4. Lead the end of the hose into a drain or
bucket.
After operation
CAUTION
Do not use the power cable to unplug or carry the device. Do not wind the
power cable too tightly or in sharp corners. Do not wrap the power cable around
the device.
1. Make sure the device is turned off.
2. Disconnect the power plug from the power outlet.
3. Wind the power cable.
4. Empty the water tank.
Maintenance
WARNING
Do not perform any repairs or modifications to this device.
Maintenance and repairs must be carried out by a EUROM authorized professional. If the
electric cable and/or electric plug is damaged, it should be replaced by the manufacturer or its
service employee or persons with similar qualifications to prevent risks.
28
(Figure
19)
Figure 19.
Publicidad
