Publicidad
Idiomas disponibles
Idiomas disponibles
0° Nozzle - Red: This nozzle delivers a pinpoint stream of pressurized water and is
extremely powerful. Use it for the toughest cleaning jobs, although It covers only a
small area. This nozzle should only be directed at surfaces that can withstand intense
high pressure such as metal or concrete. Do not use this nozzle to clean wood or soft
surfaces.
15° Nozzle - Yellow: This nozzle delivers a 15-degree spray pattern for heavy duty
cleaning and stripping. It should only be used on surfaces that can withstand pressure
from this nozzle.
25° Nozzle - Green: This nozzle delivers a 25-degree spray pattern for general tasks. It
should only be used on surfaces that can withstand pressure from this nozzle.
40° Nozzle – White: This nozzle delivers a 40-degree spray pattern for easily damaged
surfaces. It should only be used on surfaces that can withstand pressure from this
nozzle.
2. Connect nozzle to spray wand.
WARNING:
• Never place hands in front of nozzle, or
point nozzle at your face.
• Never attempt to clean a clogged nozzle
while attached to the wand.
• Never attempt to attach or remove spray
wand or hose fittings while Pressure
Washer system is pressurized.
Turn off Pressure Washer. While pointing
•
spray in a save direction, release
pressure by squeezing trigger. Then lock
the Gun Trigger before attempting to
change pressure nozzles.
3) Soap bottle:
To penetrate and remove dirt more effectively, it is recommended to using with the soap bottle.
Connect the soap bottle to spray gun, turn the soap bottle clockwise until it locked in right
position. (Fig.0)
Note: Detergent needs to be diluted to achieve the most effective cleaning. It is recommended
to diluting detergent in a suitable container to the required concentration before use.
4) Cleaning pin:
Clean the nozzle with cleaning pin (11). (See Fig.P)
2.1 To attach, pull quick connect collar
back, insert nozzle into female quick-
disconnect spray wand and press to
lock in place. Make sure collar snaps
into place.
2.2 To detach, pull quick connect collar
back and pull nozzle to remove.
9
Nozzle
Quick connect
collar
Wand
Publicidad
