Cleaning And Maintenance; Technical Specifications - Toolland VL120 Manual Del Usuario

 All blades should slice the paper evenly along the entire length of the flat blade (B) while the wheel rotates
smoothly.
 lf the appliance has an intermittent cut, adjust the appropriate side of the blades to achieve a proper
cutting performance:
 Loosen both adjustments nuts (A) equally by turning them counterclockwise.
 Tighten both adjustments nuts (A) equally by turning them clockwise.
5. Operation
 Hold the appliance with both hands.
 Keep the appliance away from hard objects and plants.
 When working long grass proceed layer for layer. First set the appliance to the maximum mowing height,
then to a lower mowing height.
 Only use the appliance for working dry grass.
6.

Cleaning and Maintenance

 The appliance does not require any special maintenance.
 Take the appliance to your dealer to have the cutting mechanism sharpened.
Cleaning the cutting mechanism
 The cutting mechanism must be cleaned after each use.
 Remove large dirt particles using a soft brush.
 Clean the cutting mechanism using a soft cloth.
 Apply a few drops of oil to the cutting mechanism to avoid oxidation.
7.

Technical Specifications

width .................................................................................................................... 300 mm
cutting height.................................................................................................. 15 to 40 mm
weight ..................................................................................................................... 6.5 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 02 – 20/10/2017
VL120
5 ©Velleman nv