Publicidad
STEP 25
With the help of another person holding the unit
steady upright, take the Loop Sensor (24c) that is
connected to the Transformer (24a) and place
underneath the Lower Shelf (J) at the hole location of
the Touch Sensor Disk (25). Thread screw (15) through
the Loop Sensor and screw into Touch Sensor Disk (25).
ameriwoodhome.com
15
24c
(x1)
(x1)
E
J
24a
Once screw (15) is fully tightened, thread the light plug
(24d) wires up along the back side of the unit. Thread
the wires through the wire saddle (20) on the top edge
of the Upper Back Panel (E). Secure wires so they don't
fall behind unit when attaching to the wall.
light plug wires (24d)
H
15
35
24d
20
J
24c
E
Publicidad
