Safety information
Electrical connection
• Special regulations apply for electrical installation in outdoor spaces. Only a
qualified electrician may perform the electrical installation.
– The qualified electrician has the necessary professional training,
knowledge and experience to perform electrical installation in outdoor
spaces. The electrician can detect potential dangers and knows how to
adhere to regional and national standards, regulations and directives.
– For your own safety, please consult a qualified electrician.
• Only connect the unit if the electrical data of the unit and the power supply
match.
• Only plug the unit into a correctly installed outlet.
• The device is to be supplied through a residual current device (RCD) having
a rated residual operating current not exceeding 30 mA.
• Extension cables and power distributors (e.g. outlet strips) must be suitable
for outdoor use (splash-proof).
• Protect open plugs and sockets from moisture.
Safe operation
• Only operate the unit with the supplied transformer.
• Do not use the unit, if electrical lines or the housing are damaged.
• The power pack or transformer and plug connections are only protected from
rain and splash water, they are not waterproof. Ensure that they are never
placed in water.
• The supply cord cannot be replaced. If the cord is damaged, the appliance
should be scrapped.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not
present a tripping hazard.
• Never carry out technical changes to the unit.
• Only carry out work on the unit that is described in this manual.
• Only use original spare parts and accessories.
Intended use
Only use the product described in this manual as follows:
• For use above and under water.
• While adhering to the technical specifications. (→ Technical data)
- EN -
13