Publicidad
Idiomas disponibles
Idiomas disponibles
Product characteristics
1. The product has a built-in lithium battery power supply;
2. After the electric mosquito flap is stopped in use, it has the function of automatically
eliminating the residual electricity on the high voltage network surface;
3. The prod uct is equipped with mosquito attractor purple light, specially selected
360-400mm mosquito attractor wavelength;
4. The power grid voltage is about 3000v when working;
5. Product with charge display function;
6. The product has over-charge, over-discharge, over-current, and load short-circuit protection,
etc., accurately detect the charging voltage to ensure
Safety of charging;
Product use method
1. For the first time, please charge the product for 3-4 hours, the product can be used while
charging;
2. When charging, insert the USB plug of the 5v charger into the charging port of the product,
push the power switch to the bottom OFF position first.
At this time, the charging indicator light on the product shines; When the charging indicator
light on the product is steady on, it indicates that the product is fully charged.
Product charging time is about 3 hours;
3. Conventional mosquito control method: Push the power switch on the right side of the
product to ON1 position (middle position), press and hold the high-pressure button switch on
the front handle, High voltage working light - the red light is on, when the metal mesh with
high voltage electricity, wave the electric mosquito bat to make the metal mesh contact with
the mosquito, the mosquito is immediately killed.
After the button switch is released, the indicator light is off. At this time, there is still residual
voltage on the metal mesh. Do not touch the metal mesh
Automatic elimination;
4. Intelligent mosquito control method: push the product power switch to ON2(the top), at this
time, the LED mosquito attractor purple light, the power grid with high voltage,
Then insert the tail of the electric mosquito bat into the base of its own, so that it becomes
a stand ing mod e, when mosquitoes and other harmful flying insects are attracted by the purple
light on the product to fly
When an electric mosquito hits the power grid, it is killed on touch;
5. The product turns off the mosquito killing function; Push the power switch to the OFF position
(bottom);
6. When using the smart mosquito killing mode, please insert the charging cable into the handle
to ensure that the electric mosquito can be used continuously for one night.
If the charging cable is not inserted, the working time of the product is about 2 hours.
Product specification
9
Publicidad
