II.
Vacuum ash
•
•
Use only the fire prevention filter.
When the container is full or it feels difficult to draw in more dust, it is necessary to
•
remove the filter and clean it.
While vacuuming the ashes from the fireplace, the temperature of the ashes must
be below 40 ° C. Do not vacuum the ashes as the fire does not extinguish! (Figure A2)
III.
After use (Fig. A3)
Press the switch to turn off the vacuum cleaner.
•
Pull out the plug.
•
Wind up the power cord.
•
Remove the soft tube from the appliance.
•
Remove the head part from the appliance.
•
Empty the dust container and wash it.
•
Use a cloth to dry the container.
•
Take out the filter, clean it, wash it carefully and air dry it before installing it in the
•
vacuum cleaner. (Figure A3)
IV.
Maintenance (Fig. A3)
The bowl and the outer shell of the head part should be cleaned frequently.
•
The dirty container should be washed clearly with clean water.
•
The filter must be washed clearly with clean water.
•
If the operation of the device is not satisfactory, it is usually due to the clogging of
•
the soft tube or the conjunction of tubes or accessories. In this case, clean the
corresponding parts.
V.
Correct disposal of this product
This mark indicates that this product should not be disposed of with other household
waste throughout the EU. To avoid potential harm to the environment or human health
from uncontrolled waste disposal, please recycle waste responsibly to promote the
sustainable reuse of material resources. To return your used device, use the return and
collection systems or contact the retailer where you purchased the product. They can
take this product for safe recycling for the environment.
11