Publicidad
Idiomas disponibles
Idiomas disponibles
l)
[optional] Refill the fluid (for cleaning and/or polishing) in the tank:
m) Connect the device to a power source equipped with grounding.
3.3.
Working with the device
a) Place the device with an appropriately sized puck on the floor to be
processed, and load it appropriately with the head.
b) [optional] Refill the liquid (for cleaning and/or polishing) in the tank - the
knob on top of it is used to adjust the dose of the agent.
c)
Adjust the position of the control handle (F) according to personal
preference.
d) Start the device by first pressing the button (B) and then pulling one of the
safety levers (A).
e) To turn off the device, just let go of the safety lever and the head will stop by
itself.
NOTE: each time the device is turned on, the start button (B) must be
pressed.
3.4.
Cleaning and maintenance
EN
Publicidad
