Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTING STAPLE DRIVE
1. Disconnect tool from air supply
using quick-connect coupling.
2. Turn adjustment dial backward
to increase staple drive, or forward
to decrease staple drive, as
shown by nail symbols on tool.
3. Connect tool to air supply, and
drive staples to check for correct
depth of drive.
4. Make depth of drive adjustments
as needed to maintain
consistent staple driving.
CLEARING STAPLE JAMS
1. Disconnect tool from air supply
using quick-connect coupling.
2. Pull pusher back to latched
position at rear of magazine.
3. Open easy clear latch and open door.
4. Remove jammed fastener.
5. Close door and secure with latch.
6. Release pusher and slide
forward against staple strips.
7. Connect air supply and check
tool for normal operation.
11
OPERATION
Publicidad
