FeinTech SDF00400 Manual De Instrucciones página 4

FeinControl SDF00400
Safety instructions
Please read the following safety instructions carefully before using this product to ensure proper use. Keep these
instructions for future reference:
• Do not attempt to open the appliance. Repairs and maintenance should only be carried out by qualified
personnel.
• Always place the appliance on a stable, flat surface to prevent it from falling.
• To avoid damage, do not expose the product to water, moisture or high humidity.
• To avoid damage, do not expose the device to direct sunlight or high temperatures.
• Do not place the device near heat sources such as radiators, heat registers, ovens or other heat-generating
devices.
• To avoid damage, do not place any objects on top of the appliance.
• Bright light, e.g. from lamps or direct sunlight, can affect remote controls. In this case, the remote control may
not work.
Batteries
2 AAA batteries are required to operate the device (not included). Open the battery compartment by sliding the
catch. Insert the 2 batteries with the correct polarity according to the + and - markings in the battery compart-
ment. If the batteries are inserted correctly, an LED on the remote control lights up when a button is pressed.
• Do not use old batteries together with new ones. Do not use different types of batteries together.
• Do not attempt to recharge the batteries.
• If you do not intend to use the remote control for a longer period of time, remove the batteries.
• If battery fluid leaks out, completely clean the battery compartment of the leaked fluid and then replace the
batteries with new ones.
• The batteries should be replaced every 12 months. If the remote control no longer works properly, replace
both batteries with new ones.
• Batteries contain recyclable materials, but may also contain substances that are hazardous to health and the
environment. Therefore, they should not be disposed of with household waste after use.
Disposal of the packaging
The packaging of the device consists of recyclable materials. Please take it to your local recycling centre. Please
contact your dealer or a municipal waste disposal facility/recycling centre for information on current disposal
methods.
Disposal of the appliance
Old appliances are not worthless waste. Valuable raw materials can be recovered through environmentally
friendly disposal. At the end of its service life, this product must not be disposed of with normal household waste,
but must be taken to a collection centre for the recycling of electrical and electronic equipment.
This is indicated by the symbol on the product, in the instructions for use or on the packaging. The mate-
rials are recyclable according to their labelling. By reusing, recycling or otherwise utilising old appliances,
you are making an important contribution to protecting our environment.
CE Declaration of Conformity
This product complies with EU directives. We, Spreewald Kommunikationstechnik GmbH, hereby declare
that this device complies with the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The
formal declaration of conformity is available at https://feintech.eu/ce or on request.
FeinTech is a registered trademark of Spreewald Kommunikationstechnik GmbH, Radensdorfer Hauptstr. 45 a,
15907 Lübben (Spreewald), Germany, info@feintech.eu
Service
If you have any questions about operation or the product, please contact us directly.
Service contact: Phone +49 3546 239 8855 - service@feintech.eu
How it works
The FeinControl can learn the most important keyboard commands of an existing infrared remote control and
then send them like the original. The few and large buttons make it easy to operate - ideal for senior citizens. The
switchable lighting simplifies operation in the dark.
If required, the FeinControl can copy individual commands from a third remote control. For example, you can
copy the programme selection buttons from the TV, but the volume control from the audio amplifier. You can
assign the buttons according to your own preferences.
Compatibility
The FeinControl remote control only supports infrared commands. However, some remote controls nowadays use
Bluetooth or radio, which are not compatible. An infrared remote control sends a signal using infrared light. This
light cannot be seen directly by the human eye. However, you can make it visible using a digital camera, mobile
phone camera or camcorder. Check whether your infrared remote control is sending a signal. Open the camera
app on a smartphone. Point the end of the remote control with the infrared transmitter at the camera lens. Look
into the viewfinder display. Press one of the buttons on the remote control. When the remote control sends an
infrared signal, you will see a light in the app. This may be a faint pink or white light. If nothing lights up, it is prob-
ably a non-compatible RF or Bluetooth remote control.