Publicidad
Idiomas disponibles
Idiomas disponibles
Operating
Instructions
_1
AUTION: The Remote
Controller
will not function
properly
if strong
light strikes the sensor window
of the air conditioner
or if there are
obstacles
between
the Remote
Controller
and the air conditioner.
Power
Operation starts when this button is pressed and
stops when you press the button again.
Temperature
Control
The thermostat monitors room temperature to
maintain the desired temperature.
The thermostat can be set between 60 F~86 F
(16 C~30 C).
The unit takes an average of 30 minutes to adjust the
room temperature by 1 F.
Fan Speed
For increased power while cooling, select a higher|
fan speed.
3 steps: High-Low-Med
On/Off Timer
The timer can be set to start and stop the unit in
hourly increments (up to 12 hours).
You will usually use shut-off time while you sleep.
For your sleeping comfort,
once timer is set,
the temperature
setting will raige 2°F after 30min
and once again after another 30min.
Operation Mode Selector
Select cooling mode to cool the room.
Select energy saver mode for energy saving operation.
Select fan mode for basic ventilating fan operation.
Select dry mode for dry operation.
Dry mode is used to remove humidity from the room without additional cooling.
Once the set temperature is reached, the compressor and circulation fan turns
off. Fan speed is pre-set and cannot be adjusted.
Fan Speed
ii
Timer
Mode
ii
How to Insert
Batteries
1. Remove the cover from the back of the remote
controller
2. Insert two batteries.
Be sure of the polarity when installing the
batteries.
Be sure that both batteries are new.
3. Re-attach the cover.
@
®
@
Do not use rechargeable
batteries. Such batteries
differ from standard dry cells
in shape, dimensions, and
performance.
Remove the batteries from
the remote controller if the air
conditioner is not going to be
used for an extended length
of time.
18 Room Air Conditioner
Publicidad
