Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - General information
The below description goes with image 1 on page 2.
1. Thermostat
2. Pan
3. Glass lid
4. Knob
BEFORE FIRST USE - Cleaning
1. Remove all packaging material.
2. Clean the appliance before using the appliance for the first time (see 'Cleaning and maintenance').
ATTENTION:
•
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first
time. This is normal and will stop on its own. Make sure the appliance has sufficient ventilation.
•
Keep house birds away from the appliance when it is in use. Fumes released from the non-stick
coating are harmful to birds.
BEFORE FIRST USE - Assembling
The description below corresponds to image 2 on page 2.
Install the glass lid (3) and knob (4) as shown in the image.
OPERATION - Preheating
1.
Put the appliance on a level and heat-resistant surface.
2.
Insert the thermostat fully into the socket (see image 3 on page 2).
ATTENTION:
Only the supplied cable with thermostat may be used.
•
3.
Put the plug in the wall socket.
4.
Adjust the thermostat dial to the required temperature (see image 4 one page 2) :
Position Temperature (°C)
1 approx. 115°C
2 approx. 155°C
3 approx. 175°C
4 approx. 185°C
5 approx. 220°C
ATTENTION:
•
The indicator light on the thermostat will illuminate to show that the heating element has been
switched on.
5.
After a few minutes the indicator light will go out. Once the indicator light has extinguished the
appliance has reached the required temperature, and is ready for use.
ATTENTION:
•
During use the heating element will switch on and off to keep the temperature of the pan constant.
Consequently the indicator light will also occasionally be illuminated.
5. Grips
6. Cord and plug
7. Bamboo spatula
8. XXL bamboo cooking sticks 2x
17
17
EN
EN
Publicidad
