VEVOR B012D Manual De Instrucciones página 8

B003S 790x790x46
Remark:
1、 Product size refers to the outermost length, width and height dimensions,
and the manufacturing tolerance is approximately ±2mm.
2、 The installation opening size refers to the size of the fixed position on the
product when it is installed. The manufacturing tolerance is about ±2mm.
3.When installing, the user needs to measure the Installation opening size
of the product to make grooves to avoid being too small for installation or
too large for unstable installation.The recommended size is within 2-5mm
of the actual measured dimensions
Take out the handles and screws, and then screw them in the cabinet door
with the screwdriver.
NOTE:（This is only for models with open handles）
705x705
ASSEMBLY STEPS
7
1 x Cleaning Pad
2 x Handle
4 x Screws
1 x Screwdriver