Briggs & Stratton Snapper SST-BC Manual Del Propietário página 9

1. Adding Oil to a New Unit 5
2. Adding Fuel 6
3. Starting a NEW Engine 7. Engine Adjustments
8
9
. Starting a Warm Engine
. Engine Maintenance
4. Starting and Stopping . Service and Storage
. Engine Warranty
Perlodic Maintenance Chart
WARNING:
Accidental engine starting can cause injury. Always remove the spark plug before servicing the engine to prevent
accidental starting.
MAINTENANCE EACH
USE
Change oil*
Check and replenish fuel
Check and replenish oil
| € |
aa o |
Check bolts, nuts and screws for looseness NOV ae
| |
€
AFTER EVERY SEASON OR
FIRST
and loss
Check throttle lever operation
Check engine switch operation
Check guard assembly condition
Clean/replace in-tank fuel filter
Clean air filter element
Tighten bolts, nuts and screws
Clean spark plug and adjust electrode gap
Remove dust and dirt from cylinder fins
| € |
HORRORE
TAME
MER
TAN
RE)
Remove carbon deposits in the exhaust Wapu
= dix il
Dres a Vj
|
muffler
Clean spark arrester screen
Check gear case assembly lubrication
Check drive shaft lubrication
Check valve clearance
"Change engine oil after first 4 hours of use. Please refer to the engine manual for more details.
NOTE: l
The service intervals indicated are to be used as a guide. Service to be performed more frequently as necessary by operating condition.
These items must be performed with proper tools.
:
See your authorized dealer for service.