Publicidad
Idiomas disponibles
Idiomas disponibles
④
•
Put the cushion Ⓐ in the cover Ⓓ, if desired.
⑤
•
Put the Active Wobble Cushion against the back of your chair.
•
Lean back onto the backrest of your chair and avoid instability.
WARNING Do not exceed the maximum loading capacity.
⑥
Deflate the cushion Ⓐ by pushing the needle Ⓒ into the valve and pushing
•
down on the cushion Ⓐ.
Technical specifications
Product codes
Dimension
Available colors
Maximum load capacity
Maintenance
To clean the Active Wobble Cushion with fabric cover:
Remove the cushion Ⓐ from the cover Ⓓ.
1.
Wipe the cushion Ⓐ using a wet cloth and mild detergent. Do not use solvents
2.
as these could damage the product.
Allow the cushion Ⓐ to dry completely. Do not tumble dry.
3.
Hand wash the cover Ⓓ at 30°C with similar colours. Wash separately for the
4.
first time. Do not use wipes or solvents as these could damage the product.
Allow the cover Ⓓ to dry completely. Do not tumble dry.
5.
6.
If needed, remove lint from the cover Ⓓ with a lint brush.
Warranty
1.
Leitz gives you a 2-year guarantee for defects in materials and
manufacturing.
2.
Leitz guarantees that when faults arise due to defects in manufacturing and
materials during the guarantee period, it will repair or, if necessary, replace
the product, free of charge. A guarantee for normal wear and tear is hereby
expressly excluded.
3.
The Leitz guarantee shall lapse in the following cases:
4.
You can find the warranty terms and the contact details of your local customer
service on the Leitz website.
6
ID_WCwS.indd 6
ID_WCwS.indd 6
a.
If the product has not been set-up and used in accordance with these
instructions;
b.
If the product has been altered or repaired by someone other than
Leitz;
c.
If a fault arises due to external causes;
d.
If the product is used for different uses than intended in this
document.
65400085, 65400089
368mm x 60mm x 366mm
Light Grey, Dark Grey
150 kg
28-4-2023 14:59:21
28-4-2023 14:59:21
Publicidad
