Behringer PRO VS MINI Guia De Inicio Rapido página 8

14
PRO VS MINI
PRO VS MINI Controls
Step 2: Controls
(EN)
1. POWER – On/Off button.
Hold for 3 seconds to turn the PRO
VS MINI on and off.
2. USB-C – Used for power and to
connect to a computer for USB
MIDI control.
3. LCD DISPLAY – OLED
information display.
4. VOLUME – Adjust the output
level from the headphones output.
Make sure the volume is turned
down before putting
on headphones.
5. PHONES – Connect your
headphones to this 3.5 mm
TRS output. Make sure the volume
is turned down before putting
on headphones.
6. SYNC – This input allows the use
of an external clock and start/stop
signal on 3.5 mm TRS jack.
7. MIDI IN – Input MIDI from an
external MIDI device such as a
sequencer or DAW.
8. WAVEFORM MIX – Mix the signals
from the 4 sound sources.
9. + PROG/OCTAVE – Increase the
program number or raise the
octave up of the selected sound.
Quick Start Guide
10. - PROG/OCTAVE – Decrease the
program number or raise the
octave up of the selected sound.
11. ENVELOPE SELECT – Allows the
controls to be used by the MIX,
FILTER or AMPLITUDE sections.
12. R1/ATTACK – Controls the attack
time of the selected envelope.
13. R2/DECAY – Controls the decay
time of the selected envelope.
14. R3/SUSTAIN – Controls the sustain
level of the selected envelope.
15. R4/RELEASE – Controls the release
time of the selected envelope.
16. LFO SELECT – Edit LFO 1 or 2.
17. RATE – Sets the speed of the LFO.
18. AMT – Controls the depth or
amount of modulation.
19. CUTOFF – Adjust the 24 dB low-
pass filter's cutoff frequency.
20. RESO – Adjusts the resonance
of the filter. This emphasizes
the frequencies around the
cutoff point.
21. WAVEFORM SELECT – Select which
one of the 4 voice waveforms,
A,B,C or D is active for voice control
or editing.
15