Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION MANUAL AND INSTRUCTIONS
ISTRUZIONI PER L'USO
USE
Note: The impact wrench can only be operated in combination with Beta's battery item 1994B 20V.
Setting direction/speed of rotation
Select the required direction or rotation – clockwise or anticlockwise – through rotation selector button (5), before operating the
impact wrench.
For screwing – clockwise rotation –, fully shift button (5) to the operator's left side.
Press button (8) in this mode, to select one of the 3 available torques values (see TECHNICAL DATA table); the position of the
LED indicator will show the selected mode:
For unscrewing – anticlockwise rotation –, shift button (5) to the operator's right side.
Press button (8) in this mode, to select one of the 2 available modes; the position of the LED indicator will show the selected
mode:
Start / Stop
To start the impact wrench in the selected mode, press on/off button (6).
When the impact wrench is operated, built-in LED indicator (7) will also turn on.
The speed of rotation is proportional to the pressure exerted by pressing the On/Off button
Releasing the on/off button will cause the cordless impact wrench to stop quickly and LED indicator (7) to turn off.
To prevent accidental start-up of the impact wrench when not in use, shift button (5) to the middle, in order to lock on/off button
(6).
Note: When the impact wrench is overloaded, thus causing excessive electricity consumption, it will stop automatically, without
any warning.
Note: When the impact wrench is overheated, it will stop automatically. In case of overheating, leave the tool to cool down.
Connection to battery 1994B 20V
Before connecting the battery to the impact wrench, test the charge level by pressing
- 3 LEDs on: maximum battery charge
- 2 LEDs on: medium battery charge
- 1 LED on: low battery charge
10
Low speed; low torque
Medium speed; medium torque
High speed; maximum torque
Single impulse unscrewing
Free unscrewing
EN
I
Publicidad
