Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Status
Assembly Procedure
Step 1
Thoroughly wash your hands before assembling the cleaned
components.
Step 2
Insert the silicone flange into the breast shield and then the assembled
piece into the connector body. Press the edges with both hands to
ensure a tight bond.
LED Display
Battery Status
Fully charged
Medium battery level (41%-70%)
Low on battery
Will power off soon
& Flashing
Charging
& Flashing
Step 3
Insert the suction bowl tightly inside the connector body from the top,
then attach the valve to the bottom of the connector body.
Step 4
Install the assembled breast shield and connector body onto the milk
collector and align the positioning line to ensure a firm and correct
bonding.
05
English
Publicidad
