Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
8
3. USING YOUR H-PURIFIER
3.1 SWITCH ON THE PRODUCT [Fig. 4]:
Pull out the power cord from the cord reel and plug into a power supply.
All lights on the Control Panel / Display will fully illuminate for approximately 1 second to indicate a
succesful plug in.
The POWER button will be dimly lit and the CO Alert LED will be ON to indicate that the dedicated
sensor has started working to monitor the indoor Carbon Monoxide level.
To switch on your product, press the POWER button on the display.
The Air Quality LED Ring will illuminate through all colours in sequence whilst the sensors are analysing
the realtime air quality condition. After a few seconds, the Air Quality LED ring will select the appropriate
colour for the air quality at that time.
Your H-Purifier product will immediately enter AUTO MODE and begin to purify the indoor air.
The AUTO MODE button, INFORMATION button, LIGHT CONTROL button and PM10 information on
the Display will illuminate.
3.2 CONNECT YOUR H-PURIFIER:
In order to access all the H-Purifiers functions from anywhere, it is suggested to download the hOn App.
You will be able to control your product in the most efficient way.
Instructions:
1.
Download the hOn application from the Apple App Store, Google Play or Huawey App Gallery. You
can also download it by scanning the QR code in [Fig. 5]
2.
Open the APP, create an account with your e-mail and a password.
3.
Confirm and log into the hOn App.
4.
Ensure your mobile device is connected to Wi-Fi.
5.
Ensure your H-Purifier is switched on. Press and hold the Wi-Fi button on the display for 5
seconds, there will be an audible beep and the Wi-Fi button will start flashing to indicate it is
waiting for a connection. [Fig. 6]
6.
Follow the in app instructions to connect your mobile device to your product.
7.
When successfully paired, the Wi-Fi button on the product will remain illuminated.
8.
To reset the Wi-Fi, press & hold the Wi-Fi button for 5 Secs.
H-Purifier also works with Hey Google and Amazon Alexa.
3.3 DISCOVER ALL THE FUNCTIONS
INFORMATION Function [Fig.7]:
There are 6 different data sets available to monitor:
PM10, PM2.5, GAS, Temperature, Humidity, and Filter Status.
To monitor each value simply press consecutively the INFORMATION button.
By default the display will show the PM10 data, the machine will remember user's last selection and
maintain this selection the next time the product is switched on.
The GAS data will show a spinning cursor during the first 3 minutes after product is switched on, while
the GAS sensor is performing a calibration cycle.
More info on PM 2.5, PM 10 and GAS:
PM indicates fine particles (not visible to the human eye) deriving mainly from outdoor pollution such as
X1 PM10
090
vehicles and industrial emissions and potentially dangerous to our health in case of prolonged exposure.
PM 10 have a size up to 10 µm and are capable of penetrating the upper respiratory tract (nose,
X2 PM2.5
065
trachea, pharynx).
X3
GAS
L3
PM 2.5 have a size up to 2.5 µm and given their small dimension, they can reach our lungs, thus
X4
TEMP
16
penetrating deeper into our body.
X5
36
HUMIDITY
GAS VOC (volatile organic compounds) are volatile chemical compounds with the ability to evaporate
X6
-
FILTER LIFE
easily in the air at room temperature. Deodorants, detergents, glues, adhesives, cosmetics,
formaldehyde are just some of the VOCs that could be present in our homes but potentially harmful to
our health in case of prolonged exposure.
MODE Functions:
There are 3 available air purifying modes : AUTO MODE, MAX MODE & SLEEP MODE.
Auto mode is the default setting for your product when switched on, all modes can be selected manually
by pressing the related button on the display.
POLLEN ALLERGY mode can only be activated via the hOn app.
AUTO MODE [Fig. 8]:
This is the default mode of your H-Purifier product when first switched on. In Auto Mode, the H-Purifier
automatically adjust its fan speed to the actual indoor air quality level to always guarantee an optimal air
purification.
This is the recommended setting for your product.
In AUTO mode, after 30 minutes of excellent air quality, your product will enter an ECO mode (Stand-by
function) by pausing the purifying function (fan), the Multi Sensor System will continue to analyse the
indoor air and automatically switch on the purifying function when required.
Publicidad
