auronic AU3130 Manual De Instrucciones página 21

3. INSTRUCTIONS FOR USE
ATTENTION!
◊ Read the safety warnings carefully before assembling and using the
product to avoid personal injury and damage to the product.
3.1 Assembly
Make sure the plug is unplugged and that you have enough space to
mount the product.
1. Turn the large lamp clockwise on the top part of the rod to attach it
together.
2. Attach the other parts of the rod together by turning them clockwise.
3. Turn the base clockwise to attach it to the rod.
4. Attach the power cord to the adapter.
5. Place the lamp in the desired location and plug into an appropriate
outlet.
3.2 Adjusting the lamps
You can adjust the large and small lamp by moving
them to the desired angle. The pictures show in which
direction you can adjust each lamp. Do not try to move
the lamps (further) if you feel resistance.
3.3 Using the control panel
The upper button (5) operates the large lamp.
The lower button (6) operates the small lamp.
1. Touch the desired button briefly to turn on the product.
2. Touch the button again to adjust the color temperature: warm light >
natural light > cold light.
3. Touch and hold the button for a few seconds to adjust the brightness:
strong - weak.
4. Touch the button again briefly to turn off the product.
English
1
2
3
4
5
6
21