PLEASE CALL OUR SUPPORT HOTLINE AT 1-800-613-6889
Residual moisture on the product is normal.
100% of our products are mechanically tested with pure water during production to ensure quality.
It is normal to find residual moisture on the product from the testing process.
YOU MADE THE RIGHT DECISION! –
Congratulations on receiving your PETRATOOLS HD2000 Battery Powered Backpack Sprayer with 60-80 PSI! We've desig-
ned this sprayer with YOU in mind; making it functional for commercial and at-home use. If you find that it doesn't meet your
needs or if you want to make a feature suggestion, please reach out to us at
1-800-613-6889 – we want to make everything right for you! And if you love this sprayer as much as we do, please consider
leaving us a review from wherever you purchased your sprayer – it really means a lot to us!
QUICK START INSTRUCTIONS –
Watch the quick start video at
preferred wand to handle, and handle to the hose. Pour your solution in the tank through the filter, rotate the black pressure
adjuster clockwise to your desired pressure amount (60-80+ PSI) and start spraying!
01
02
03
04
After use, follow these instructions:
Run clean water through your sprayer to remove any chemicals that were used and drain all liquid from the hose and handle as much as possible by
squeezing the trigger for several seconds. Do not store any chemicals in the tank or leave the sprayer in direct sunlight or freezing temperatures.
Visit
www.petratools.com/start
get fully depleted or letting it sit for a long period of time without a charge (3 months or less).
Questions/Issues
with your product?
We're here to help!
HD2000
PRODUCT MANUAL
If you have any questions or concerns or missing parts
DO NOT RETURN UNIT FROM STORE/ONLINE RETAILER:
Visit
www.petratools.com
Common maintenance questions:
www.petratools.com/start
FOLLOW THESE 8 STEPS CLOSELY TO QUICKLY GET STARTED!
Charging your sprayer before use
Your
HD2000
battery
arrives
charged. We recommend charging your unit
6-8 hours before using the first time.
Priming the sprayer pump
When first using your sprayer, pour 1 gallon of
warm water into the tank in order to prime the
pump. Turn sprayer on and fully spray out the
water. Failure to prime the pump in this way
can cause low initial pump performance.
Adjusting sprayer pressure switch
To switch on the HD2000, turn the variable
pressure switch to the right and then you'll hear
the battery running, so that means the sprayer
is working. For full pressure, you can turn the
variable pressure switch all the way to the right
then turn it all the way to the left to turn off the
sprayer.
Reading LED voltmeter
If fully charged, the LED voltmeter will be
pointed to the green zone. If the battery
requires charging, you will see the red light
indicating low charged. Charge fully by
plugging into 110V outlet and allow battery 6 -
8 hours to charge. If the voltmeter is not
operating upon arrival, fill the tank with water
and run the unit for at least 30 minutes to
activate.
for further cleaning and storage tips. Connect your sprayer to the charger after each use and avoid letting your battery
Please visit the page
petratools.com/support
to get the fastest resolution to your problem.
Email our support:
support@petratools.com
www.petratools.com/start
Visit Petratools.com/start for full instructions and videos.
support@petratools.com
Visit Petratools.com/start for full instructions and videos.
for the fastest way to get started. Connect preferred nozzle to wand,
partially
or call/text at
Importance of using
teflon/plumber's tape
Apply teflon tape to all connection points on the
hose, handle and nozzle. Any battery powered
05
sprayer operates under high pressure, which
means that there is always potential for leaks.
Using the teflon tape at all connection points
prior to spraying will reduce leak points.
Connecting your hose
Attach your valve handle to the hose by
screwing the male thread onto the female
thread clockwise until fully tightened. Squeeze
06
the trigger to spray and use the trigger-lock for
extended convenient spraying.
Connecting your multipurpose wand
Screw your wand onto the end of the handle
tightly, again using included teflon/plumber's
tape at the connection point.
07
Your multiple PetraTools nozzles
Uses: You have multiple nozzles included with
your unit. Visit
www.petratools.com/start
additional nozzle attachment selections we will
08
add over time.
Directions: Attach your nozzle directly to the
end of the wand.
NOTE - Use included PTFE teflon tape on
wand end for all nozzles before attaching.
Toll free: 1-800-613-6889
Contact us: support@petratools.com
Website: www.petratools.com
for