GE AEZ24 Manual Del Propietario Y Instrucciones De Instalación página 4

About the controls on the air conditioner
Features and appearance win vary.
Lights next to the touch pads on the air conditioner control pane/indicate the selected settings.
NOTE: The display always showsthe room
temperature exceptwhen setting the Set
temperature or tile Delaytimer.
Light indicates the unit
is in the temperature or
delay time Set mode.
Light indicates tile delay
timer is set.
Delay 1-24hr
Delaytimer
__/_ li__ Delaytimer
Decrease Increase
Mode select Auto Fan
oil
Fanspeed Fan speed
Decrease Increase
Temperature 0 _ @ Unit power
set Increase 0n/off
and Decrease
Air Conditioner Controls
Remote Control
Controls
Power Pad
Turns air conditioner on and off, When turned
on, the display will show the room temperature,
Display
Shows the room temperature or time remaining
on the Delay timer, Shows the Settemperature
while setting the temperature in Coo/or Energy
Saver modes, The Set light will turn on while
setting,
Temp Increase A/Decrease T Pads
Use to set temperature when in Coolor Energy
Savermode, The Setlight will turn on while
setting,
Delay l-liner IncreaseA (+)/Decrease Y (-)
Pads
Each touch of the Increase A / Decrease T
pads on the unit or the Increase + / Decrease
= pads on the remote control will set the delay
time when using the Delay 1-24hrtimer, The
Set light will turn on while setting,
Fan Speed Pads
Use to set the fan speed to Low, Meal, High
or Auto on the unit, NOTE."On the remote
control, use the fan speed Increase + /
Decrease = pads to set the fan speeds to Low,
Medor High, Use the Auto pad to turn Auto
fan on,
Mode Pad
Use to set the air conditioner to Coo/, Energy
Saver or Fan Only mode,
Delay Pads/Delay 1-24hr Pad
Delay ON--When the air conditioner is off, it can
be set to automatically come on in I to 24 hours
at its previous mode and fan settings,
Delay OFF--When the air conditioner is on,
it can be set to automatically turn off in 1 to
24 hours,
How to set:
Press the Delay 1-24hrpad on the unit or the
Delaypadon the remote control, Each touch
of the Increase A / DecreaseT pads on the
unit or the Increase + / Decrease = pads on
the remote control will set the timer in 1-hour
intervals, The Setlight will turn on while setting,
To review the remaining time on the Delay
1-24hrtimer, press the Delay 1-24hr pad on
the unit or the De/aypadon the remote control,
Use the Increase A / Decrease T pads on the
unit or the Increase + / Decrease = pads on the
remote control to set a new time if desired,
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hrpad goes off,
IVote:The default temperature reading on the display is degree Fahrenheit (°F), To change the display to
degree Celcius (°C), press the Temp Increase A and Temp Decrease _' buttons together and hold for 3
seconds, Repeat the process to change back to degree Fahrenheit (°F)
4