Publicidad
Idiomas disponibles
Idiomas disponibles
REAR PANEL
1. Limiter indicator: Red light lights up when the audio
signal reaches the maximum output power of the speaker,
the input signal will be restricted. Adjust the level control
and HF control appropriately if the red light illuminates
continuously.
2. Signal indicator: The LED illuminates when an audio
signal is present.
3. Volume controls for LINE IN.
4. Switch Select LINE when connecting a mono line
source, Select MIC, when connecting a dynamic
microphone, these inputs do not have Phantom for
microphone present (48v). Switch to the LINE position
when a line-level source, such as an audio mixing console,
audio playback device, or electronic musical instrument, is
connected.
5. MIC/LINE input: This balanced input accepts a male xlr
or 1/4" jack. A range of microphone signals, audio mixing
consoles and electronic musical instruments can be
connected here.
6. Volume control for AUX/BT input.
7. AUXILIARY INPUT: Use a 3.5 mm stereo or mono Jack
connector.
8. Output: Use female XLR connector for balanced or
unbalanced.
9. Power switch.
10. IEC power connector. Connect a supplied IEC cable or
equivalent.
11. Master Control. Multi-function encoder, adjust final
output volume or browse unit options.
FUNCTIONS
1. Home page
When starting the unit, the master volume control is displayed by default.
Note: after 10 seconds, if no operation is executed, the adjustment menu will return to the
main page (Master Volume).
w
w
w
a .
u
d
b i
a
x
c .
o
m
KINGSTON 12 DSP / KINGSTON 15 DSP
MASTER
dB
VOL
4
11
1
2
3
4
5
~ 220-240V, 50Hz
9
10
PRO
6
7
8
Publicidad
