Shark RS-JET CARBON Manual página 33

VISOR MAINTENANCE
Clean the visor using only mild liquid soap,
warm water and a soft, damp cloth. Allow
the visor to dry naturally before reassem-
bling it.
WARNING! Do not use abrasive
cleaning products or liquids containing
ammonia or alcohol.
For your safety, under no circumstances
ride with a visor that does not provide
you with perfect. If your visor does not
guarantee excellent visibility after a period
of use, it is absolutely necessary to replace
it.
POSITION PINLOCK® FILM
Your RS-JET Carbon is made to receive
a PINLOCK®, a flexible plastic film that
absorbs moisture. Placed against your
visor, it offers very effective anti-fog pro-
tection. It prevents the formation of micro
droplets which compromise your field of
vision.
1 – Place the visor on a work surface
covered with a soft material. Make sure
the internal surface of the visor is clean.
Use a coin to check whether the external
adjustment levers are positioned inwards
("INT" position).
14
MIN MAX
2 – Place the PINLOCK® film on the
visor. The silicone seal of the PINLOCK®
film must be in contact with the interior
surface of the visor. The PINLOCK® logo
should be readable from the outside of
the visor.
3 - Insert one side of the PINLOCK® film
into one of the two pins at the ends of the
visor and hold it in position.
1
4 – Extend and flex the visor and fit the
second side of the PINLOCK® film into
the second pin. Release the visor so that it
returns to its curved shape.
2
3
4