Descargar Imprimir esta página

ZAZU BREATHING LIGHT Manual De Usuario página 81

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
CHANGE THE SETTINGS
Last used settings will be remembered for next use.
Breathing technique
To start the breathing technique, press this button and
choose between the following settings:
- Pulse light and breathing sound
- Pulse light only
- Breathing sound only
- OFF
Note When using the breathing technique, you can only
play the breathing sound. It cannot be combined with
the sound machine melodies.
Elephant button (nightlight)
Choose your preferred brightness: LOW-MEDIUM-HIGH-OFF
Note When using Emmy with batteries, we advise to use
the lowest brightness, to ensure a longer battery life.
1
2
Frequency
Children's breathing rate will change during age.
FREQUENCY
Therefore we have 2 settings:
1 19 breaths per minute: generally suitable up to ± 2-6 years
2 22 breaths per minute: generally suitable up to ± 1-2 years
Music button
If you want to listen to soothing songs choose between:
- Lullabies
- White noise
- African lounge
- OFF (no music)
Note The above songs cannot be used together
with the pulse light.
Volume
Press the volume button to change the volume:
LOW-MEDIUM-HIGH
Timer switch
The light and music can automatically switch off after
20-40 minutes. If you set the slider to OFF, the timer
will not be active and the sound/music will keep playing
and the light stays on.
Note When using batteries, we advise to use the
20 minute timer to ensure a longer battery life.
Cry sensor
- When you set the slider to ON, the cry sensor will
become active for 12 hours straight away.
- The cry sensor will have a delayed start of 30 seconds,
so that it will not activate when putting Emmy back
on the bedside table for example.
- After 12 hours it is no longer active.
- When pressing the front button the 12-hour timer
will (re)start.
Note Switching off the product with the front button,
will NOT switch off the cry sensor. It will stay active
for 12 hours or until you put the slider in OFF position.
LV

Publicidad

loading