Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION OF LED AND BUTTONS
Power(blue light)
Off
On
Flash
When printer power on, press
the FEED button
Hold down the FEED button in
the shutdown state, and then
power on the printer, when you
see the BLUE light is ON-OFF
then release the button
Hold down the FEED button in
the shutdown state, and then
power on the printer, when you
see the BLUE light is ON-OFF-
ON, then release the button
Hold down the FEED button in
the shutdown state, and then
power on the printer, when you
see the BLUE light is ON-OFF-
ON, then release the button. (If
the printer is setting to another
printing mode or something
else, resulting in the printer not
working properly, it is neces-
sary to reset the correct prin-
ting mode of the printer.)
8
Printer status
Printer off
Printer is on and have
paper
Printer is on and no paper
Paper out /Label positioning
detection
Print self-test page
HEX mode (press FEED
button two times to exit
HEX mode)
Change the print command
between TSPL, CPCL and
ESC/POS
Publicidad
