Publicidad
Idiomas disponibles
Idiomas disponibles
12. Position loose cords underneath the cable
management tray (8) in center frame (6). Attach the
cable management tray to the center frame using
four M6 x 10 mm bolts (E). (See Figure 13)
Figure 13
8
8
13. Align holes on modesty panel brackets (B) with holes
on outer edge of metal modesty panel (2). Attach
using two M6 x 14 mm bolts (F). Repeat on opposite
side of metal modesty panel. (See Figure 14)
14. Attach two modesty panel connectors (C) on the
top edge of metal modesty panel (2) using two
M6 x 14 mm bolts (F). (See Figure 14)
Figure 14
PAGE 5 OF 24
ASSEMBLY CONTINUED
6
E
2
F
C
B
F
15. Align holes in the modesty panel brackets (B) and
connectors (C) with pre-threaded holes in the
desktop (1). Attach using six M6 x 14 mm bolts (F).
(See Figure 15)
Figure 15
2
1
16. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
17. Place cable clips (I) in desired locations to neatly
organize cables underneath the desktop. Cable
clips can be attached using adhesive or
ST3.5 x 16 screws (H). (See Figure 16)
Figure 16
I
H
2
F
F
B
C
1
1123 IH-11113
Publicidad
