Publicidad
Idiomas disponibles
Idiomas disponibles
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 62841:
Vibration emission value
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
12
WARNING: The vibration and noise
emissions during actual use of the power
tool can differ from the declared value depending on
the ways in which the tool is used especially what
kind of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
40V Cordless Hedge Trimmer EN
L
= 82.8 dB(A)
pA
K
= 3 dB(A)
pA
L
= 93.8 dB(A)
wA
K
= 5.16 dB(A)
wA
Rear: a
=1.79 m/s²
h
Front: a
=2.73 m/s²
h
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
4. INTENDED USE
The machine is intended for cutting and trimming
hedges and bushes in domestic use.
5. OPERATING INSTRUC-
TIONS
NOTE: Before using the tool, read the
instruction book carefully.
WARNING! Do not use the product without
attaching the guard and front handle.
ASSEMBLY & OPERATION
ACTION
BEFORE USING YOUR CORDLESS
HEDGETRIMMER
Assembling the safety guard
Assembling the front handle
NOTE : The handle is designed to
prevent being assembled in wrong
direction . If you find it cannot be
installed, please turn it around.
Assembling Hedge Sweeper
NOTE:To avoid clippings and other
debris to fall back into the hedge,
you can use the Hedge Sweeper to
sweep the cuttings off the hedge.
You can operate the machine with or
without Hedge Sweeper according to
different working conditions.
Checking the battery charge condition
NOTE : Fig. C only applies for the
battery pack with battery indicator
light.
FIGURE
See Fig. A
See Fig.
B1, B2
See Fig.
C1,C2
See Fig. D
Publicidad
