Publicidad
Idiomas disponibles
Idiomas disponibles
use
Ice cube production
•
IMPORTANT: Do not open the lid while making
ice cubes. You can check production through
the viewing window.
•
Before plugging the appliance into the power
outlet after moving it, please allow the appliance
to rest for 30 minutes.
1.
Make sure the drain plug is inserted into the drain hole in the bottom of the water tank.
2.
Open the lid and take out the ice cube basket.
3.
Fill the water tank with room temperature water (1.2 L max.). Make sure that the water does
not overflow into the ice cube basket and does not exceed the MAX mark indicated on the
interior wall of the appliance.
4.
Replace the ice cube basket and close the lid.
5.
Plug the power cord into an earthed AC outlet. The power indicator flashes white. The
appliance is in standby mode.
6.
Press the SELECT button to select the large or small ice cube program. The respective
indicator lights up solid white when the program is selected.
7.
Press the ON/OFF button to start making ice. The power indicator lights up solid white and
ice production begins.
8.
When you have obtained the desired amount of ice cubes, turn off the appliance by pressing
the ON/OFF button and unplug it from the power supply. It takes about 7-15 minutes to make
ice cubes. The time may vary depending on the ambient temperature of the room and the
water poured into the tank.
9.
Place the ice cubes in a container or glasses for immediate use, or place them in the freezer
for storage.
10.
After removing the ice cubes, remove the drain plug located under the appliance and allow
the remaining water to drain from the water tank. Replace the drain plug when all the water
has been drained.
16
Publicidad
