Publicidad
Optima 60E
Operating instructions - Original
Intended use
This product is intended to be used indoors for stapling paper or similar materials.
The product should only be used in offices or similar environments, such as shops
and households. All use other than described in this manual is seen as unintended
use.
For your safety
Please read all the safety information and the instructions. The manufacturer
is not liable for cases of material damage or personal injury caused by
incorrect handling or non compliance with the safety instructions. In such
cases, the warranty will be voided.
•
Keep all safety information and instructions for future reference and pass them
on to subsequent users of the device.
•
This equipment is not suitable for use in locations where children are likely to be
present.
•
This device is not intended for use by persons (including children) with
restricted physical, sensory or intellectual capability or lack of experience and/or
knowledge, unless they are supervised by a person who is responsible for their
safety or provides them with instructions on how to use the device. Children
should be supervised in order to ensure that they do not play with the device.
•
Check the device and cable for any damage before use. If there is any visible
damage, a strong odour, or excessive overheating of components, unplug all the
connections immediately and stop using the device.
•
The device must be connected to a permanent and earthed AC wall socket.
•
Use the device in a suitable, properly installed and easily accessible mains
power socket. Locate near the outlet and do not use extension cords. Make sure
the device can be disconnected from the mains at all times.
•
Prior to connecting to the mains, make sure your local mains voltage matches
the rating indicated on the device.
•
Moving parts. Keep fingers away from the opening during operation.
•
Do not drop or hit the device.
•
Do not attempt to open, modify or repair the device. Do not drop, puncture,
break or expose to high pressure.
•
Alterations to the device and technical modifications are not permitted.
•
Product Temperature range for operation = +5°C / +40°C
•
Max. 15 staplings per minute to prevent overheating.
4
GB
Publicidad
