Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
• Change the water after the third cleaning process at
the latest.
• When cleaning glasses, make sure that the lenses do
not touch the bottom of the tank. They could become
scratched.
• Only use the appliance on a non-slip, level surface.
• The objects used must be completely covered with
water.
• Special care must be taken when cleaning valuable
objects. Remember that ultrasound can loosen the
attachment of stones in jewellery.
• The appliance works with ultrasound. This sound can
disturb pets.
How it Works
The appliance cleans objects with ultrasonic waves that
are inaudible to humans. The ultrasonic waves cause small
bubbles to form in the water on the objects to be cleaned.
These immediately disintegrate again. The resulting suction
of the bubbles gently removes the dirt. The appliance
enables easy and gentle cleaning of surfaces and hard-to-
reach areas.
Cleaning Small Objects
Small objects can start moving in the tank during the clean-
ing process. This may damage them, e. g. by scratching
them.
1. Place small objects in the insert basket provided.
2. Place the basket in the appliance.
3. Carry out the cleaning process as described under
"Operation".
Cleaning Larger Objects
You can also clean larger objects with the appliance.
1. Only partially immerse the object to be cleaned in the
water tank.
2. Carry out the cleaning process as described under
"Operation".
3. Then immerse the other side of the object in the water
tank.
4. Carry out the cleaning process as described under
"Operation".
Cleaning Watches
The appliance can also be used to clean watches. Make
sure that the watch is waterproof! Watches often leak due
to ageing. Therefore, have the watch checked for water
resistance by a watchmaker.
1. Attach the watch to the insert tray.
2. Place the insert tray with the watch in the appliance.
3. Carry out the cleaning process as described under
"Operation".
PC-USR3120_IM_12.2023 EU Netzteil
Electrical Connection
• Check that the mains voltage you wish to use matches
that of the appliance. You will find the relevant informa-
tion on the rating plate.
• Only connect the appliance to a properly installed
earthed socket.
Operation
1. Open the lid.
2. Fill the water tank with cold water. Fill it up to the MAX
mark at most.
3. Place the object to be cleaned completely in the water.
4. Close the lid.
5. Insert the power supply unit plug into the mains connec-
tion socket on the back of the appliance.
6. Plug the power supply unit into a properly installed
socket.
7. Briefly press and hold the
- The
and
control lamps light up.
- After 15 seconds without operation, the appliance
switches off automatically.
8. Press the
button to select the operating time. The
control lamp for the selected time lights up.
9. Press the
button to start cleaning.
- The process can be ended prematurely by pressing
the button again.
10. When the cleaning process is complete, open the lid and
remove the object.
11. Unplug the power supply unit from the socket and the
power supply plug from the mains connection socket on
the appliance.
12. Empty the water tank.
Cleaning
WARNING:
• Always disconnect the appliance from the power
supply unit before cleaning.
• Never immerse the appliance and the power supply
unit in water for cleaning! This could lead to an electric
shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaning agents.
• Wipe the interior and the housing dry with a soft, lint-free
cloth after each use.
• You can wipe the power supply unit with a dry cloth.
button.
7
21.12.23
Publicidad
