Beta 095260005 Manual De Instrucciones página 9

EN
INSTRUCTIONS FOR USE
TIPS FOR USING THE MINI FRIDGE
The mini fridge should be set at a temperature of 4 °C.
The shelves placed in factory mode mean the most efficient use of energy for refrigerating appliances.
The shelves should be placed as per legend, so that energy can be used by the refrigerating unit in the most efficient way.
If the ambient temperature is 25 °C and the mini fridge is not fully loaded, it will take approximately 90 minutes to bring the
temperature of the mini fridge to 4 °C.
If the mini fridge is set at a temperature of 4 °C, the energy consumption will be 0.279 kWh/24h.
Setting the mini fridge at a temperature higher than 4 °C will result in lower energy consumption.
Setting the mini fridge at a temperature lower than 4 °C will result in higher energy consumption.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
• deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment and
human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
WARRANTY
This equipment, which is manufactured and tested in accordance with current EU regulations, is covered by a 12-month warranty
for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or replacing them at
our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty will remain
unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. This warranty will no longer
be valid if any changes are made, or if the equipment is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.

DECLARATION OF CONFORMITY
We hereby declare, assuming responsibility, that the described product complies with all the relevant provisions of the following
Directives and amendments thereto:
• Electromagnetic Compatibility (E.M.C) Directive 2014/30/EU;
• Low Voltage Directive (LVD) 2014/35/EU
• Directive 2011/65/EU on the restriction of the use of certain hazardous Substances -Ro.H.S. 2011/65/UE
ErP Regulation (EU) 2021/340 with regard to energy labelling requirements
Regulation (EU) 2021/341 with regard to ecodesign requirements
The Technical File is available from:
BETA TOOLS S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
08/09/2023
9