LEGRAND QIS Guia Del Usuario

No: 070027 – 07/23 rev. 2
Catalog Numbers • Les Numéros de Catalogue • Los Números de Catálogo: QIS Power Panel
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
CAUTION: The Qadvanced Intelligent System (QIS) does not operate on
"standard" Power over Ethernet (PoE) schemes. Do not attempt to connect the
QIS to any PoE device or RJ-45 PoE port. Doing so will damage the system
components and/or the external Ethernet or PoE device.
Use CAT5e/CAT6 wire to connect QIS shades to the Power & Communication
Panel. Terminate wires using RJ-45 connectors (T568B Standard). QIS shades
will Jog upon connecting power to the shade. The Amber LEDs on the Power &
Communication Panel (RJ-45) ports signify "power" is active.
To daisy chain additional QIS Power & Communication Panels, use either of
the Communication Ports (RS-485) to expand the system capabilities up to 32
devices per RS-485 port.
Wiring for Cat 5e/6 Cable
• Category 5e/Category 6 for use with RJ-45 Connector
• 24 AWG
Maximum length of wire from Power & Communication Panel to
device:
• Up to an 8' X 8' Shade with 40:1 motor - 1250'
• 8' X 8' to 12' X 12' Shade with 73:1 motor - 750'
Maximum length of wire for Hardwired 4 and 8 Button
Switches:
• 1000' feet from switch to farthest power panel
Maximum wire length for RS485 communication:
• 2000' feet from source to shade
System Capacity:
• 32 Devices per RS-485 port (Legrand Shades, Legrand
Hardwired Switches)
Power Supply:
AC Input ................................................................................................100-240 VAC, 2.5A
DC Output ..................................................................................................... 24 VDC, 7.5A
Impulse Voltage Rated: .......................................................................................................330V
Input/Output Rating ........................................................................................ 24VDC, 7.5A Max
Ports:
8 RJ-45 for motorized shades and switches
2 additional RJ-45 communication ports for daisy chaining with other QIS power panels
UL/C-UL Listed
Type 1 Operating Control
Independently Mounted for Surface Mounting
Pollution Degree: 2
Software Control Function: Class A
Ambient Temperature .......................................................................... 32° to 104°F (0° to 40°C)
Storage Temperate .............................................................................23° to 176°F (-5° to 80°C)
Suitable for Use in Air Handling Space (Plenum) in Accordance with NEC Section 300.33, (C)
QIS POWER & COMMUNICATION PANEL SETUP
QIS Power Panel
AlimentationPanneau d'alimentation QIS
Panel de alimentación QIS
User Guide • Manuel d'utilisation • Guía del usuario
SPECIFICATIONS
Power Port
Device Ports
(Shades and Switches)
T568B standard Pinouts
Pin Wire Color
1 White/Orange
2 Orange
3 White/Green
4 Blue
5 White/Blue
6 Green
7 White/Brown
8 Brown
Terminating Resistor
Communication Ports
(RS485)
Ports are daisy-chained
Pin 1
Signal 10/100BaseTx
A+
B-
+24 VDC
+24 VDC
+24 VDC
GND
GND
GND