Hitachi WH 8DH Manual De Instrucciones página 19

Atornilladores de percusion sin cable de conexion
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Lastly, install the brush cap.
CAUTION:
Be absolutely sure to insert the nail of the carbon
brush into the contact portion outside the brush
tube. (You can insert whichever one of the two
nails provided.)
Caution must be exercised since any error in this
operation can result in the deformed nail of the
carbon brush and may cause motor trouble at an
early stage.
6. Check for Dust
Dust may be removed with a soft cloth or a cloth dampened with soapy water.
Do not use bleach, chlorine, gasoline or thinner, for they may damage the plastics.
7. Disposal of the exhausted battery
WARNING:
8. Storage
Storing in a place below 104°F (40°C) and out of the reach of children.
9. Service and repairs
All quality power tools will eventually require servicing or replacement of parts because
of wear from normal use. To assure that only authorized replacement parts will be used,
all service and repairs must be performed by a HITACHI AUTHORIZED SERVICE CENTER,
ONLY.
Do not dispose of the exhausted battery. The battery must explode if it
is incinerated. The product that you have purchased contains a re-
chargeable battery. The battery is recyclable. At the end of it's useful
life, under various state and local laws, it may be illegal to dispose of this
battery into the municipal waste stream. Check with your local solid
waste officials for details in your area for recycling options or proper
disposal.
English
Contact portion
outside brush tube
Fig. 14
19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Uc 14yf2

Tabla de contenido