My First CareBuds Manual Del Usuario página 5

Auto Power O
The earbuds will automatically power o in the following
situations:
• If they are in pairing mode and no device is connected
after 5 minutes.
• If the earbuds and connected device are too far apart and
no connection is made after 5 minutes in the connection
and pairing mode.
• If the earbuds' battery voltage falls below 3.2V.
Connect
To connect the earbuds to your device, follow these steps:
1. Open the charging case and remove the earbuds. They
will automatically turn on and pair with each other.
2. When the blue and red lights on the earbuds flash
alternately, they are ready to be paired with your device.
3. Select "myFirst CareBuds" from the list of available
connections to connect the earbuds to your device.
*Note: During the pairing process, you may hear voice
prompts indicating the status of the connection.
Eartip sizes (Diameter)
Extra-extra Small
9.40mm
Extra Small
10mm
Small
10.80mm
Medium
11.50mm
Large
12.00mm
Extra Large
12.80mm
4